Ventilator VK 150 U, 460 m3/h with thermostat

Code: 8870
€134,35 €111,03 excl. VAT
Available on request

Quiet VK 150 U duct fan, 460 m3/h, made from durable and lightweight ABS plastic. The duct fan with thermostat is suitable for extracting air from offices, shops, flats, halls or industrial premises. The internal thermostat works simply and can make operation easier. First, set the desired temperature on the fan. If the ambient temperature rises by 2 degrees above the set temperature, the motor automatically switches to a higher speed. Once the temperature returns to normal, the fan switches back to a lower speed.

Detailed information

Product detailed description

Single-phase asynchronous motor with an external rotor and overheating protection. The motor has ball bearings and a permanent grease fill for its entire service life. Insulation class II and protection rating IPX4.

Given its technical parameters, it is intended for use over medium distances of around 20 metres. The fan is designed for extracting air from small and medium-sized rooms such as bathrooms, showers, kitchens, greenhouses, cinemas, cottages, shops and anywhere you need high pressure and low noise at the same time.
The fan is designed for installation in both rigid and flexible ducting. The fan is designed for both vertical and horizontal placement. Thanks to its durable ABS plastic construction, this type is suitable for installation in humid environments. Mounting brackets are supplied with the fan.

Ball bearings will extend the service life of your fan to 40,000 hours.

You set the required temperature manually directly on the fan. If the temperature rises by 2 degrees, the motor starts running faster. When the room cools down, it switches back to a lower speed.

Parameters of the VK 150 U fan, with thermostat:
- for flexible and rigid ducting with a diameter of 150 mm
- max. air capacity (output): 355 m3/h
- consumption (input): 80 W
- pressure: 290 Pa
- 2725 rpm
- acoustic pressure: 46 dbA
- weight: 2.6 kg
- optimal operating temperature: -25/+55 degrees
- motor overheating protection, operation up to 40,000 hours and more
- recommended for ducting with a max. length of 20 m
- protection rating: IP X4

We supply the plastic VK 150 U fan with thermostat and output of 4600 m3/h including clips. Speed can only be regulated using an external controller (thyristor or autotransformer). When installing, starting up and handling the fan, follow the Czech instructions included in the package. Connect and install exactly according to the manual and the enclosed diagram.

For help using the fan, see this manual.
You can find the catalogue sheet here.

Additional parameters

Category: VK Fans
EAN: 4824032014585
Flange (mm): 150
Speed Control: Smooth speed regulation and thermostat
Technology: Radial
Airflow (m3/h): 460
PFHGX: Levné, Nejprodávanější, Doporučené, Kvalitní, Značkové, Základní

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field:

Security check