Fan TT 100 U, 187 m3/h with thermostat

The TT 100 U plastic fan with a maximum output of 187^m3/h is designed for ventilation ducts with a diameter of 100 millimetres. The main advantages of this product include an electronic temperature sensor, which ensures automatic speed control depending on the air temperature.

MOTOR:
Single phase motor with ball bearings. The motor is equipped with a thermal fuse with automatic restart. IPX4 degree of protection.

APPLICATION:
The Vents TT 100 U fully meets the requirements for high pressure yet low noise. The fan finds its application in areas with very high humidity such as greenhouses, nurseries, cellars, public toilets, factory kitchens, archives, etc. Thanks to its technical parameters, it is designed for extraction in ductwork up to 10 metres. This fan with electronic temperature sensor and controller is used for automatic speed control depending on the air temperature in the ventilation duct or inside the room.

TERMOSTAT:
If the temperature rises 2°C above the thermostat set point, the fan will automatically switch to a higher speed. When the set temperature is reached, the fan switches back to a lower speed and continues to extract.

INSTALLATION:
The fan can be installed at any point in the duct system - horizontally. In addition, several fans can be installed simultaneously to increase the pressure or capacity of the transported air. The fan body is equipped with a mounting plate for wall mounting.

The fan is supplied with a supply cable.

Specifications:
- maximum air capacity (power): 187^m3/h
- power consumption (input): 33 W
- 2500 rpm
- pressure: 135 Pa
- sound pressure level: 35 dbA
- compatible with 100 mm diameter round duct
- weight: 1.4 kg
- protection: IP X4
- max. operating temperature: 60 degrees
- for a maximum pipe length of 17 m

Here you can find the datasheet.