TD Mixvent 500/150 three-speed fan

Product detailed description

The TD 500 housing is made of plastic. The housing consists of a mounting rail with two spigots and a motor, which is connected to the spigots by quick-release clamps. The design allows the motor section to be removed without the need to disconnect the ducting.
The fan motors TD- 500 to TD-2000 have triple winding. For motors with triple winding, the speed is switched in three stages using COM 3 or INT 4P controllers, or voltage variation control can be used with REB controllers (continuous control) or REV (five-stage control). 
The terminal block is located on the fan housing; on some types it contains a starting capacitor.

Fan installation is possible in any fan position. The housing must not transfer mechanical stress from the ducting. It is necessary to use a flexible connection to the ducting.

Parameters:
- air flow: 560/470/390 m³/h
- speed: 2590/2150/1820 rpm
- duct diameter: 150 mm
- power: 53/44/41 W
- voltage: 230V
- current: 0.21/ 0.19/ 0.18 A
- protection rating: IP44
- max. temperature: -20 to +60 °C

Operating instructions here: TD instructions
Product information catalogue: TD catalogue

Dimensions (in mm):

*you can find the fan drawing in the photo gallery