Milwaukee MW802, pH and EC/TDS metre with external electrode

Product detailed description

The Milwaukee MW802 combined measuring instrument can measure pH acidity or alkalinity, EC electrical conductivity and ppm saturation of the nutrient solution at the same time.

Soil and water pH that is too acidic or alkaline can have an adverse effect on plant nutrients, water absorption and a direct effect on the effectiveness of herbicides and pesticides. Soil EC is checked before fertiliser application to determine requirements and assess its effectiveness.

The main advantage of the easily portable pH/EC/TDS metre is the combined measurement of three values, a clear and legible display, and a probe on a one metre long cable. The external replaceable probe is protected by a special fibre, which extends its service life and guarantees maximum measurement reliability. If the probe breaks, it only needs to be replaced; there is no need to buy a new instrument.

The package includes the digital combined metre MW802, SE600 probe with cable, batteries and the original manual.

Parameters:

- pH range: 0.00 to 14.00 pH
- EC range: 0.00 to 6.00 mS/cm
- TDS range: 0 to 4000 ppm
- pH resolution. 0.10 pH
- EC resolution: 0.01 mS/cm
- TDS resolution: 10 ppm
- pH accuracy: ± 0.20 pH
- EC / TDS accuracy: ± 2% full scale
- conversion factor: 0.5
- calibration: manual
- temperature compensation: automatic from 0 to 50°C
- probe: SE600 pH/EC/TDS combination
- environment: 0 to 50°C/max. relative humidity 95%
- battery type: 1 x 9V alkaline
- service life: 150 hours of use
- Auto-off: after 8 minutes of inactivity
- dimensions: 185 x 82 x 45 mm
- weight: 165 g (with battery)

How to calibrate and care for Milwaukee pH metres?

In the enclosed manual, see how to correctly calibrate the Milwaukee combined pH/EC/TDS metre. You can extend the service life of the instrument and the accuracy of measurement by using quality buffers and storage solutions. Calibration is recommended approximately once a month. Use a sterile calibration solution for each calibration.

Protect measuring instruments from shocks, impacts and other damage. Protect types that are not waterproof from getting wet and from excessive humidity or dust. The warranty on the electrode is valid for 6 months from the date of sale! The other parts are covered for 24 months from the date of sale.