Faven Chroma LED 120W Under Canopy Light 3.0

Product detailed description

```html

Faven Chroma LED 120W Under Canopy Light 3.0

Faven Chroma LED 120W Under Canopy Light 3.0 is a professional LED light designed for installation under the plant canopy. Its main advantage is the ability to change the ratio of the red and white light components across the R4–R9 range and operate the Far Red channel separately.

The light complements the main overhead lighting and also brings light to the lower and inner parts of the crop, where radiation from the main lighting reaches only to a limited extent. Thanks to its linear design, wide beam angle and high light output, the Faven Chroma 3.0 is particularly suitable for intensive growing systems where the aim is to illuminate the entire plant evenly.

Adjustable R4–R9 spectrum

Faven Chroma LED 120W Under Canopy Light 3.0 allows the ratio of the red and white light components to be changed across the R4–R9 range. This setting corresponds to approximately 40 to 90% red component in the main light spectrum.

• R4 – approximately 40% red component
• R9 – approximately 90% red component
• the option to adapt the spectrum to individual growing-cycle phases

A compatible controller is required to regulate the R4–R9 spectrum. For full control of this light, we recommend the Faven CX2 CONTROLLER EU, which allows you to regulate the intensity of the main lighting, change the R4–R9 spectrum and control the Far Red channel separately.

Control using Faven CX2 CONTROLLER EU

Faven CX2 CONTROLLER EU is a control unit designed for advanced control of Faven Chroma lights. To use all the advanced options of the Faven Chroma LED 120W Under Canopy Light 3.0, we recommend this controller.

Faven CX2 CONTROLLER EU enables:

• regulation of the main lighting intensity
• changing the R4–R9 spectrum
• separate regulation of the Far Red channel
• timing of the main lighting
• separate timing of the Far Red channel
• setting sunrise and sunset simulation
• manual and automatic time-controlled operation
• control of two independent light channels
• control of up to 100 compatible lights per channel

Faven CX2 CONTROLLER EU is not included with the light and must be purchased separately.

Separate Far Red channel

Faven Chroma LED 120W Under Canopy Light 3.0 is equipped with a separate 15 W Far Red channel. When connected to the Faven CX2 CONTROLLER EU, the Far Red can be controlled independently of the main light channel and its own timing schedule can be set.

This allows the main R4–R9 spectrum and Far Red to be set separately according to the required lighting programme.

Designed specifically for under-canopy installations

Faven Chroma 3.0 has a slim linear design suitable for placement directly under the plant canopy. The wide 120° beam angle helps distribute light evenly throughout the lower part of the crop.

The light uses passive cooling without fans and an integrated power supply. The robust construction with IP66 protection is designed for use in demanding growing environments.

Connecting multiple lights

Faven Chroma LED 120W Under Canopy Light 3.0 can be connected into larger lighting systems. When powered at 240 V, the manufacturer states that a maximum of 17 lights can be connected in a single power chain.

For larger installations, several separately powered branches can be created. Their control can then be centralised using the Faven CX2 CONTROLLER EU.

Key features

• professional LED lighting under the plant canopy
• main LED system output of 120 W
• separate 15 W Far Red channel
• adjustable R4–R9 spectrum
• approximately 40–90% red component
• PPF of up to 380 µmol/s
• main light channel regulation from 40–100% + OFF
• 120° beam angle
• integrated power supply
• passive cooling without a fan
• IP66 protection
• option to connect multiple lights
• R4–R9 spectrum regulation using Faven CX2 CONTROLLER EU
• separate Far Red control using Faven CX2 CONTROLLER EU
• service life of more than 50,000 hours
• 5-year manufacturer's warranty

Technical specifications

• Model: Faven Chroma LED 120W Under Canopy Light 3.0
• Type: LED Under Canopy
• Main LED system output: 120 W
• Far Red channel: 15 W
• Spectrum: adjustable R4–R9
• Red component: approx. 40–90%
• PPF: up to 380 µmol/s
• Power regulation: 40–100% + OFF
• Beam angle: 120°
• Protection rating: IP66
• Power supply: integrated
• Cooling: passive
• Maximum operating temperature: 35 °C
• Service life: more than 50,000 hours
• Dimensions: approx. 116 × 7.4 × 8.4 cm
• Weight: 2.6 kg
• Maximum number of lights in a single power chain at 240 V: 17 units
• Recommended control unit: Faven CX2 CONTROLLER EU
• R4–R9 spectrum control: using Faven CX2 CONTROLLER EU
• Far Red control: using Faven CX2 CONTROLLER EU
• Warranty: 5 years

What is required for connection?

The light itself is supplied without a power cable, control unit or other accessories. The required cabling is selected according to the specific installation and the number of lights used.

Faven CX2 CONTROLLER EU is not essential for basic operation. However, if you want to use the main advanced functions of the Faven Chroma LED 120W Under Canopy Light 3.0, particularly R4–R9 spectrum regulation, separate Far Red control, timed programmes and sunrise and sunset simulation, we recommend using the Faven CX2 CONTROLLER EU.