Ebb&Flow glue for flood trays, 300 ml

Product detailed description

Quality adhesive is designed specifically for Ebb&Flow flood trays. Volume 300 ml. Excessive use of the adhesive may damage the trays.

Bonding must be carried out:
- at temperatures between 5-25 °C
- the reservoirs must be dry and kept in dry conditions during the curing process

Support for table reservoirs:
- the trays are designed to support a maximum evenly distributed load of 70 kg/m2.
The following criteria must be met:
- bench trays must be supported with a gap of up to 500 mm.
- the support should be positioned less than 70 mm from the edge of the adhesive.
- the support should be positioned less than 200 mm from the edge of the bench reservoir. Please note that the tray must not rest on the support beam

The support MUST be positioned under the part of the tray that contains the adhesive edge (see drawing).