AC Infinity Air Filtration Kit 100mm, Inline Fan with Speed Controller, Carbon Filter & Ducting Combo

Product detailed description

Complete 100 mm ventilation kit in one box

The AC Infinity Air Filtration Kit 100 mm combines all the main components needed for cooling, air extraction and odour control in a small grow space in one package – an inline fan, carbon filter and connecting hose. All components have the same 4" (100 mm) diameter and are spec-matched, so there is no need to source the components individually. The kit is part of the AC Infinity UIS™ platform.

What is included

• CLOUDLINE inline fan with a 10-speed wired speed controller
• Carbon filter with Australian activated carbon (Australian Virgin charcoal RC412, 1200+ IAV) and pre-filter fabric
• Flexible four-layer hose (ducting) – 300" (25 ft / 7.62 m)
• Stainless steel hose clamps (duct clamps)
• Rope clip hangers and hanging straps for installation

Fan: performance and technical specifications

• Kit model: AC-FKS4
• Airflow: 165 CFM
• Noise level: 29 dBA
• Maximum speed: 2800 RPM
• Static pressure: 324 Pa
• Voltage: 100-240 V AC, 50/60 Hz
• Power consumption: max. 35 W / average 18 W, current 0.55 A
• Protection rating: IP44
• Bearings: dual ball bearings (Dual Ball), L10 lifespan 67,000 hours
• Mounting: horizontal or vertical
• Fan dimensions: 19.0 x 30.2 x 17.6 cm

Filter and hose

The carbon filter has a 4" opening, overall dimensions of 33.3 x 17.7 cm, a reversible aluminium flange on both sides (3.7 cm) and a galvanised steel mesh. The Australian activated carbon RC412 (1200+ IAV) fill is 38 mm thick and the filter supports a maximum airflow of 210 CFM. The hose, with a diameter of 10.2 cm and a length of 300" (25 ft), has an outer PVC layer, an inner aluminium foil layer and steel spiral reinforcement.

Which space is the 100 mm variant suitable for?

The 4" (100 mm) diameter is the smallest in the Air Filtration Kit range – suitable for smaller grow spaces and grow tents where lower airflow is sufficient. The kit is also available in larger diameters of 6" (150 mm) and 8" (200 mm) for more spacious areas.

Control and additional components

The fan is controlled using the included 10-speed wired controller – simply connect it and set the speed by turning the dial. For smart control based on the climate in the space via an app, the same diameter is also available in the Air Filter Set AI+ PRO 100 mm version with an AI+ controller. Individual parts can be added or replaced separately in the future:

• CLOUDLINE S4 – separate 100 mm fan with speed controller
• Duct Carbon Filter 100 mm – replacement carbon filter
• Flexible hose 100 mm, 7.62 m – replacement or extension ducting
• Stainless steel clamps 100 mm, 2 pcs – replacement clamps

Frequently asked questions

Is a speed controller included?
Yes, the included 10-speed wired controller (speed controller) is part of the kit.

Can the fan be connected to a smart controller with an app later?
The fan is part of the UIS platform, and its control cable with a UIS connector can be connected to a separately purchased smart controller instead of the included controller (e.g. CONTROLLER 69 PRO or CONTROLLER AI+).

Do all kit components have the same diameter?
Yes, the fan, filter and hose in this kit are consistently sized for 4" (100 mm).