Urban Heater tubular heater 190W with stepless regulation

Product detailed description

Tube heater with smooth regulation Urban Heater 190W is intended mainly for growers and keepers of smaller animals.
Heating is suitable for cultivation in greenhouses, grow boxes and other growing spaces.

You will use it especially when caring for seedlings and cuttings in winter and colder months.

Main advantages:
- maintains a constant temperature
- requires almost no maintenance
- supplied including brackets, which are used for installation on the wall or floor
- safety fuse against overheating
- low consumption
- high IP55 protection

Technical specification:
- Power input: 190W
- Length: 1510 mm
- Protection: IP44
- 220-240V, 50 Hz

When and why to use heating during indoor cultivation?
Warning, it is not possible to say unambiguously how long it will take and to what temperature you will heat the growing space. The manufacturer does not state this information. This is because the final temperature is affected not only by the heater’s own power input, but also by the initial temperature and, above all, the size of the space. The ambient temperature and how well the interior space is thermally insulated also have an effect.

If the initial temperature inside the growing box 100x100x200 cm (space 2 m3) is, for example, 10° C and you want to increase it to 20° C, it will take some time depending on the conditions. If you want to heat a growbox 200x200x200 cm (space 8 m3) from 10° to 20° C, it will take approximately 4x longer with the same output. With heating with a lower power input, you will most likely not manage it at all.

In addition, when cultivating, it is not necessary to heat the entire space constantly to the maximum.

The most important thing is a constant temperature around the plants themselves. That is why heating elements are used mainly to maintain a stable temperature.

What to never do with Urban Heater heating:
- do not switch it on until it is perfectly installed
- use it out of reach of children and pets
- do not handle it if the heater is connected to the mains
- do not immerse in water
- do not leave the cable draped over the heating element
- do not install the heater near flammable and combustible objects
- if it is not in operation, disconnect it from the mains
- for cleaning, use only a damp clean cloth
- further instructions can be found in the manual enclosed in the download files