Atami B'cuzz Tables

How should fertilisers from the professional B’cuzz product range be dosed? Here is a proven method!

• It is advisable to apply the individual fertilisers from this product range to plants through watering in synergistic combinations. That is why we provide recommended combinations, as they say, what with what and how much of each.
• In the first two tables, the main fertiliser is 1-component, in the next two it is the two-part Soil A+B, the next pair of tables for growing in coco is based on Coco A+B and for hydroponics the basis is Hydro A+B.
• And it is precisely to the above-mentioned “main components” of each of these combinations that, in addition to other supplementary fertilisers, a second key product is assigned within the relevant table. In the case of the professional B’cuzz range, this is either Blossom Builder Liquid for the final finishing of the plant, or Bloombastic, representing a perfect combination of minerals and stimulators, specially tuned for the flowering and ripening phase.

Are you looking for dosing tables for another fertiliser range?
- Atami ATA
- Atami ATA NRG (Organics)

SOIL

1-Component  + Blossom Builder Liquid

• ATA Clean, a biological cleaning agent for irrigation systems, should be applied in the same way throughout the entire growing cycle, in an amount of 0.05 – 0.1 ml. The only exception is the flush in the tenth week.

1st-2nd week

• Add the complex biomineral fertiliser 1-Component to the watering solution in an amount of 1 – 3 ml.

• Dose the biological root stimulator Atami B’cuzz Root Stimulator in an amount of 0.5 – 1 ml.

3rd-4th week

• Increase the dose of 1-Component to 2 – 4 ml.
• Instead of the root stimulator, add the growth activator Soil Booster to the watering solution at this stage in an amount of 0.1 – 0.5 ml.
• In the fourth week, begin using the flower stimulator Bloom Stimulator as well.

5th week

• In the middle of the growing cycle, dose 1-Component in an amount of 3 – 4.5 ml.
• The fifth week is the last week in which you will add Soil Booster to the watering solution, ideally at a dose of 0.5 ml.
• Continue using Bloom Stimulator (0.5 – 1 ml).

6th-7th week

• Now is the right time for Blossom Builder Liquid in an amount of 0.25 – 0.50 ml.
• The other fertilisers remain at the dose according to the table.

8th-9th week 

• Increase the dose of fertiliser 1-Component a little more. Apply 4 – 5 ml.
• In addition, add the other fertilisers from the previous steps to the watering solution in the amounts specified in the table.

10th week

• Flush the plants with clean water and look forward to a successful harvest.

1-Component  + Bloombastic

• ATA Clean, a biological cleaning agent for irrigation systems, should be applied in the same way throughout the entire growing cycle, in an amount of 0.05 – 0.1 ml. The only exception is the flush in the tenth week.

1st-2nd week

• Add the complex biomineral fertiliser 1-Component to the watering solution in an amount of 1 – 3 ml.
• Dose the biological root stimulator Atami B’cuzz Root Stimulator in an amount of 0.5 – 1 ml.

3rd-4th week

• Increase the dose of 1-Component to 2 – 4 ml.
• Instead of the root stimulator, add the growth activator Soil Booster to the watering solution at this stage in an amount of 0.1 – 0.5 ml.
• In the fourth week, begin using the flower stimulator Bloom Stimulator (0.5 – 1 ml).

5th week

• In the middle of the growing cycle, dose 1-Component in an amount of 3 – 4.5 ml.
• The fifth week is the last week in which you will add Soil Booster to the watering solution, ideally at a dose of 0.5 ml.
• Continue using Bloom Stimulator.

6th-7th week

• Now is the right time for Bloombastic in an amount of 0.5 – 1 ml.
• The other fertilisers remain at the dose according to the table.

8th-9th week

• Increase the dose of fertiliser 1-Component a little more. Apply 4 – 5 ml.
• In addition, add the other fertilisers from the previous steps to the watering solution in the amounts specified in the table.

10th week

• Flush the plants with clean water and look forward to a successful harvest.

Products Atami B´ cuzz

Soil A+B + Blossom Builder Liquid

• ATA Clean, a biological cleaning agent for irrigation systems, should be applied in the same way throughout the entire growing cycle, in an amount of 0.05 – 0.1 ml. The only exception is the flush in the tenth week.

1st-2nd week

• Add the two-part mineral fertiliser for growing in soil Soil A+B to the watering solution in an amount of 1 – 1.5 ml for each component.

• Dose the biological root stimulator Atami B’cuzz Root Stimulator in an amount of 0.5 – 1 ml.

3rd-4th week

• Increase the dose of Soil A+B for both components to 2 ml.
• Instead of the root stimulator, add the growth activator Soil Booster to the watering solution at this stage in an amount of 0.1 – 0.5 ml.
• In the fourth week, begin using the flower stimulator Bloom Stimulator (0.5 – 1 ml).

5th week

• In the middle of the growing cycle, dose Soil A+B in an amount of 3 – 4.5 ml.
• The fifth week is the last week in which you will add Soil Booster to the watering solution, ideally at a dose of 0.5 ml.
• Continue using Bloom Stimulator.

6th-7th week

• Now is the right time for Blossom Builder Liquid in an amount of 0.25 – 0.50 ml.
• The other fertilisers remain at the dose according to the table.

8th-9th week 

• Increase the dose of fertiliser Soil A+B a little more. Apply 4 – 5 ml.

• In addition, add the other fertilisers from the previous steps to the watering solution in the amounts specified in the table. 

10th week

• Flush the plants with clean water and look forward to a successful harvest.

Soil A+B + Bloombastic

• ATA Clean, a biological cleaning agent for irrigation systems, should be applied in the same way throughout the entire growing cycle, in an amount of 0.05 – 0.1 ml. The only exception is the flush in the tenth week.

1st-2nd week

• Add the two-part mineral fertiliser Soil A+B to the watering solution in an amount of 1 – 1.5 ml for each component.
• Dose the biological root stimulator Atami B’cuzz Root Stimulator in an amount of 0.5 – 1 ml.

3rd-4th week

• Increase the dose of Soil A+B for both components to 2 ml.
• Instead of the root stimulator, add the growth activator Soil Booster to the watering solution at this stage in an amount of 0.1 – 0.5 ml.
• In the fourth week, begin using the flower stimulator Bloom Stimulator (0.5 – 1 ml).

5th week

• In the middle of the growing cycle, dose Soil A+B in an amount of 3 – 4.5 ml. 
• The fifth week is the last week in which you will add Soil Booster to the watering solution, ideally at a dose of 0.5 ml.
• Continue using Bloom Stimulator.

6th-7th week

• Now is the right time for Bloombastic in an amount of 0.5 – 1 ml.
• The other fertilisers remain at the dose according to the table.

8th-9th week

• Increase the dose of fertiliser Soil A+B a little more. Apply 4 – 5 ml. 
• In addition, add the other fertilisers from the previous steps to the watering solution in the amounts specified in the table.

10th week 

• Flush the plants with clean water and look forward to a successful harvest.

Products Atami B´ cuzz

COCO

Coco A+B + Blossom Builder Liquid

• ATA Clean, a biological cleaning agent for irrigation systems, should be applied in the same way throughout the entire growing cycle, in an amount of 0.05 – 0.1 ml. The only exception is the flush in the tenth week.

1st-2nd week

• Add the two-part biomineral fertiliser for growing in coco Coco A+B to the watering solution in an amount of 0.5 – 1 ml for each component.
• Dose the biological root stimulator Atami B’cuzz Root Stimulator in an amount of 0.5 – 1 ml.

3rd-4th week

• Increase the dose of Coco A+B for both components to 2 ml.
• Instead of the root stimulator, add the growth activator Coco Booster to the watering solution at this stage in an amount of 0.1 – 0.5 ml.
• In the fourth week, begin using the flower stimulator Coco Bloom Stimulator (0.5 – 1 ml).

5th week

• In the middle of the growing cycle, dose Coco A+B in an amount of 2 – 3 ml and maintain this dosage until the end of the 9th week.
• The fifth week is the last week in which you will add Coco Booster to the watering solution, ideally at a dose of 0.5 ml.
• Continue using Coco Bloom Stimulator.

6th-7th week

• Now is the right time for Blossom Builder Liquid in an amount of 0.25 – 0.50 ml.
• The other fertilisers remain at the dose according to the table.

8th-9th week

• Continue dosing from the previous weeks according to the table.

10th week 

• Flush the plants with clean water and look forward to a successful harvest.

Coco A+B + Bloombastic

• ATA Clean, a biological cleaning agent for irrigation systems, should be applied in the same way throughout the entire growing cycle, in an amount of 0.05 – 0.1 ml. The only exception is the flush in the tenth week.

1st-2nd week

• Add the two-part biomineral fertiliser for growing in coco Coco A+B to the watering solution in an amount of 0.5 – 1 ml for each component.
• Dose the biological root stimulator Atami B’cuzz Root Stimulator in an amount of 0.5 – 1 ml.

3rd-4th week

• Increase the dose of Coco A+B for both components to 2 ml.
• Instead of the root stimulator, add the growth activator Coco Booster to the watering solution at this stage in an amount of 0.1 – 0.5 ml.
• In the fourth week, begin using the flower stimulator Coco Bloom Stimulator (0.5 – 1 ml).

5th week

• In the middle of the growing cycle, dose Coco A+B in an amount of 2 – 3 ml and maintain this dosage until the end of the 9th week.
• The fifth week is the last week in which you will add Coco Booster to the watering solution, ideally at a dose of 0.5 ml.
• Continue using Coco Bloom Stimulator.

6th-7th week

• Now is the right time for Bloombastic in an amount of 0.5 – 1 ml. 
• The other fertilisers remain at the dose according to the table. 

8th-9th week

• Continue dosing from the previous weeks according to the table.

10th week 

• Flush the plants with clean water and look forward to a successful harvest.

 

Products Atami B´ cuzz

HYDROPONICS

Hydro A+B + Blossom Builder Liquid

• ATA Clean, a biological cleaning agent for irrigation systems, should be applied in the same way throughout the entire growing cycle, in an amount of 0.05 – 0.1 ml. The only exception is the flush in the tenth week.

1st-2nd week

• Add the two-part biomineral fertiliser for hydroponic growing Hydro A+B to the watering solution in an amount of 0.5 – 1.5 ml for each component.
• Dose the biological root stimulator Atami B’cuzz Root Stimulator in an amount of 0.5 – 1 ml.

3rd-4th week

• Increase the dose of Hydro A+B for both components to 2 ml.
• Instead of the root stimulator, add the growth activator Hydro Booster to the watering solution at this stage in an amount of 0.1 – 0.5 ml.
• In the fourth week, begin using the flower stimulator Bloom Stimulator (0.5 – 1 ml).

5th week

• In the middle of the growing cycle, dose Hydro A+B in an amount of 2 – 3 ml and maintain this dosage until the end of the 9th week.
• The fifth week is the last week in which you will add Hydro Booster to the watering solution, ideally at a dose of 0.5 ml.
• Continue using Bloom Stimulator.

6th-7th week

• Now is the right time for Blossom Builder Liquid in an amount of 0.25 – 0.50 ml.
• The other fertilisers remain at the dose according to the table.

8th-9th week

• Continue dosing from the previous weeks according to the table.

10th week

• Flush the plants with clean water and look forward to a successful harvest.

Hydro A+B + Bloombastic

• ATA Clean, a biological cleaning agent for irrigation systems, should be applied in the same way throughout the entire growing cycle, in an amount of 0.05 – 0.1 ml. The only exception is the flush in the tenth week.

1st-2nd week

• Add the two-part biomineral fertiliser for hydroponic growing Hydro A+B to the watering solution in an amount of 0.5 – 1.5 ml for each component.
• Dose the biological root stimulator Atami B’cuzz Root Stimulator in an amount of 0.5 – 1 ml. 

3rd-4th week

• Increase the dose of Hydro A+B for both components to 2 ml.
• Instead of the root stimulator, add the growth activator Hydro Booster to the watering solution at this stage in an amount of 0.1 – 0.5 ml.
• In the fourth week, begin using the flower stimulator Bloom Stimulator (0.5 – 1 ml).

5th week

• In the middle of the growing cycle, dose Hydro A+B in an amount of 2 – 3 ml and maintain this dosage until the end of the 9th week.
• The fifth week is the last week in which you will add Hydro Booster to the watering solution, ideally at a dose of 0.5 ml.
• Continue using Bloom Stimulator.

6th-7th week

• Now is the right time for Bloombastic in an amount of 0.5 – 1 ml.  

• The other fertilisers remain at the dose according to the table.

8th-9th week

• Continue dosing from the previous weeks according to the table.

10th week

• Flush the plants with clean water and look forward to a successful harvest.

 

Products Atami B´ cuzz