Ventilator VK 315 U, 1340m3/h with thermostat

Code: 8873
Brand: Vents
€186,91
Ventilátor VK 315 U, 1340m3/h s termostatem Cover
€186,91 €186,52 €154,15 excl. VAT
Available on request
Delivery offer

The plastic duct fan VK 315 U, 1340m3/h made of durable ABS plastic is compatible with flexible and rigid air ducts with a diameter of 315 mm. The built-in thermostat simplifies the ventilation of your rooms. You can manually set the desired temperature directly on the fan. If the temperature rises by 2 degrees, the motor will run faster. When the room cools down, it switches back to a lower speed.

Detailed information

Product detailed description

Single-phase asynchronous motor with external rotor and overheating protection. The motor has ball bearings and a permanent grease cartridge for life. Insulation class II and IPX4 protection rating.

Due to their technical parameters, they are designed for use for medium distances of around 45 metres. The fan is designed for extracting air from small and medium sized rooms such as bathrooms, showers, kitchens, greenhouses, cinemas, cottages, shops and wherever you need high pressure and low noise at the same time.
The fan is designed for installation in rigid and flexible ducts. The fan is designed for both vertical and horizontal placement. This type is suitable for installation in wet environments due to its construction in durable ABS plastic. Mounting brackets are supplied with the fan.

Ball bearings will extend the life of your fan to 40000 hours.
The fan is equipped with a more powerful motor, which will increase its performance by 30% compared to a conventional motor of the same diameter.

You manually set the desired temperature directly on the fan. If the temperature increases by 2 degrees, the motor will start to run faster.

Parameters of the VK 315 U fan, with thermostat:
- for flexible and rigid ducts with a diameter of 315 mm
- max. air capacity (power): 1340m3/h
- consumption (power): 200 W
- pressure: 505 Pa
- 2655 rpm
- sound pressure: 50 dbA
- weight: 5.1 kg
- optimum operating temperature: -25/+50 degrees
- motor overheating protection
- operation up to 40.000 hours or more
- recommended for pipelines with a maximum length of 35 m
- protection.

We supply the VK 315 U ducted radial fan with thermostat and with an output of 1340m3/h, including attachments. The speed can only be controlled by an external controller (thyristor or autotransformer). Follow the Czech instructions included in the package for installation, start-up and handling of the fan. Wiring and installation should be carried out exactly according to the manual and the enclosed diagram.

This VK manual will help you to use the fan.
Here you can find the catalogue sheet.

Additional parameters

Category: Ventilators
Flange (mm): 315
Speed Control: Smooth speed regulation and thermostat
Technology: Radial
Airflow (m3/h): 1340
PFHGX: Levné, Nejprodávanější, Doporučené, Kvalitní, Značkové, Základní

Be the first who will post an article to this item!

Only registered users may post articles. Please log in or register.

Do not fill out this field: