TT 125 U Fan, 280 m³/h – display model, unused

The fan has never been used. It was displayed in a showroom.

APPLICATION:
The Vents TT 125 U fan fully meets the requirements for high pressure while maintaining low noise levels. The fan is suitable for use in areas with very high humidity, such as greenhouses, grow rooms, basements, public restrooms, commercial kitchens, archives, etc. Thanks to its technical specifications, it is designed for exhaust ventilation in duct systems up to 17 meters. This fan, equipped with an electronic temperature sensor and controller, is used for automatic speed control based on the air temperature in the ventilation duct or inside the room.

MOTOR:
The single-phase motor with ball bearings has two speeds that can be switched using an external switch. The motor is equipped with a thermal fuse with automatic restart. IPX4 protection rating.

THERMOSTAT: If the temperature rises 2 °C above the thermostat’s set temperature, the fan automatically switches to a higher speed. Once the set temperature is reached, the fan switches back to a lower speed and continues to exhaust air.

INSTALLATION:
The fan can be installed at any point in the duct system—horizontally. Additionally, multiple fans can be installed simultaneously to increase pressure or the capacity of the transported air. The fan housing is equipped with a mounting plate for wall mounting.

The fan is supplied with a power cord.

Technical specifications:
- diameter: 125 mm
- airflow: approx. 100–280^m³/h
- ball bearings: yes
- max. temperature: 60 °C
- speed: 1060/2500 rpm
- static pressure: 105/138 Pa
- sound pressure: 29/36 dB/1m
- power supply: 230V 50Hz
- power consumption: 23/37 W
- rated current: 0.19/0.26 A
- protection rating: X4 IP
- weight: 1.40 kg

Click here for the product data sheet.