Trolmaster 240V Humidity Device Station (DSH-2E) DE

The picture is illustrative. Product is available in DE version

TrolMaster DSH-2 humidity/dehumidification control modules allow the user to easily connect and control standard humidification or dehumidification equipment to the Hydro-X. This module allows control of any humidification or dehumidification device to world standard voltage (100-240 VAC, 50/60 Hz), up to 10 amps.

Use with dehumidifiers that draw less than 7 amps to avoid overcurrent.

LED Signaling:
- Flashes green FAST: If the LED flashes fast, it means the module has not been addressed to the control unit OR the module does not have a good connection to the control unit.
- Press the small button on the module to address/connect the module when first installed.
- SLOW BLINKING GREEN LED: If you see a slowly blinking green LED, it means that the module is addressed and connected to the control unit and the module is currently powered off.
- BLINKING GREEN: If you see the LED steady (not blinking), it means that the modules are addressed, connected and currently powered on.
- Flashing Red: If the LED changes to flashing red, it means that the module is overloaded. To reset the overload, disconnect the module from power.
- By pressing and holding the button on the DSH-2 module, users can manually overload and power on/off the module.

Package includes:
- 1 x Device Station
- 1 x 16ft RJ12 Cable
- 1 x 4ft RJ12 Cable
- 1 x RJ12 T-Splitter

Technical Specifications:
- Input Voltage: 240V AC, 50/60 Hz
- Output Current: 10A
- Output Voltage: 100-240V AC, 50/60 Hz
- Operating Temperature: 0-50°C
- Operating Humidity: < 90% RH