TD Mixvent 1000/250 3V three-speed fan

The TD 1000 cabinet is made of galvanized steel sheet coated with epoxy lacquer. The enclosure consists of a mounting rail with two throats and a motor which is connected to the throats by quick-release clips. The design allows the motor section to be removed without disconnecting the ductwork.
The motors of the TD- 500 to TD-2000 fans have triple windings.For triple winding motors (TD 500 - TD 2000), the speed is switched in three stages by means of COM 3 or INT 4P controllers or voltage change control by REB (continuous control) or REV (five stage control) controllers can be used.
The terminal block is located on the fan casing, on some types it contains a start-up capacitor.

Installation of fans is possible in any fan position. The cabinet must not transmit mechanical stresses from the ductwork. A flexible connection to the ductwork must be used.

Parameters:
- air flow: 960/910/850^m3/h
- speed: 2790/2620/2510 rpm
- duct diameter: 250 mm
- power: 130/99/91 W
- voltage: 230V
- current: 0,46/0,31/0,28 A
- protection: IP44
- max. temperature: -20 to +60 °C

Operating instructions here:TD manual
Catalogue with product information:TD catalogue

Dimensions (in mm):

*Drawing of the fan can be found in the photo gallery