TD Mixvent 250/100

The TD-250 fan housing is made of plastic. The housing consists of a mounting rail with two throats and a motor which is connected to the throats by quick-release clips. The design allows the motor section to be removed without having to disconnect the ductwork.
The AC motors in the TD-160 to TD-350 fans have dual windings, allowing for dual speed operation. On dual winding AC motors (TD-160-350), the speed is switched in two stages using REGUL 2 or COM 2 controllers or by changing the voltage with REB (stepless control) or REV (five stage control) controllers.
The terminal block is located on the fan housing and on some types includes a start-up capacitor.

Installation of fans is possible in any fan position. The cabinet must not transmit mechanical stresses from the ductwork. A flexible connection to the ductwork must be used.

Parameters:
- air flow: 250/200^m3/h
- speed: 2140/1700 rpm
- pipe diameter: 100 mm
- power: 28/22 W
- voltage: 230V
- current: 0,12/0,10 A
- noise level: 31/26 db(A)
- max. temperature: -20 to +40 °C

Operating instructions here: TD manual
Catalogue with product information: TD catalogue

Dimensions (in mm):

*Drawing of the fan can be found in the photo gallery