GSE Digital controller with LCD display for 2 EC fans RJ45

This EC fan controller with LCD display, keypad and power indicator light makes it very easy to set and read all the information provided by the fan, such as the current set speed, temperature, day/night humidity, suction fan vacuum and exhaust fan RPM. A built-in light sensor detects day/night modes. The control unit can run multiple EC intake and exhaust fans.

The EC fan controller is supplied as a finished part and is ready to use. This reliable fan controller is supplied as a complete part with a low voltage sensor, making it ideal for wet rooms. The sensor is supplied with a 4 metre cable. This can be extended up to 10 metres if required. Four cables to the fan including all 4-pin 3.5mm jack connectors, two EC adapters to connect several fan brands such as (Can-Fan, Primaklima, Carbon Active) and an industrial terminal block for hard wiring.

Features:
- Temperature day
- Temperature hysteresis day
- Humidity day
- Humidity hysteresis day
- Minimum speed day
- Maximum speed day
- Temperature night
- Temperature hysteresis night
Humidity Night
- Humidity Hysteresis Night
- Minimum Speed Night
- Maximum Speed Night
- Negative Pressure Setting
- Switch Sensor Level
- Day/Night Time Switching

Sub-menu functions:
- Calibration of the lowest possible speed.
- Backlight setting
- Selection of possible 0-10V output signal or PWM (pulse width modulation) setting.
- Suction fan ON - OFF behavior
- Factory reset.

Package includes:
- 1x EC fan controller
- 1x humidity, temperature and light sensor 4m
- 2x RJ45 black 4m
- 2x Stereo-jack 3.5mm to RJ45 black 4m cable
- 2x EC fan adapter clamp/RJ45/Stereo-jack 3,5 mm
- 1x Mounting Kit including screws and dowels
- 1x User Manual
-1x Power Supply 12VDC 100mA (depending on variant)

Is a power supply required?
If the EC-fan provides a 2-wire signal-GND, then yes,
If the EC-fan provides a 3-4 wire signal-GND-VDC >10V/35mA, then no power supply is required.

LCD display:
- Graphical and digital display of constant RPM.
- Temperature display
- Constant humidity display
- Set point selection is not constant, via input buttons

Setting range:
- Temperature: 15C° to 35C°, Hyst. 1 to 5C°, Hyst.
- Humidity setting: 0-100%, Hyst. 1 to 20%
- Minimum speed: off, 1% to 100%
- Maximum speed: 10% to 100%
- Underpressure: 0% to -50%

Dimensions and technical data:
- Housing height = 75 mm, width 140 mm, depth 35 mm.
- Weight: 0.25 kg
- Voltage: 12VDC
- Power supply: 35mA
- Protection class: PROTECTION: IP 20