SANlight EVO 3-100 LED Set 380W, 3 µmol/J - on sale
Code: N41594Product detailed description
The box contains the top quality SANlight EVO 3-100 LED lights and useful accessories. The two lights are perfectly suited forindoor growing in a 100x100 cm area.
The main advantages of the LED SANlight EVO:
- superior module efficiency (no loss) >3 μmol/J and low consumption
- broadband light spectrum with optimized FarRed/Red spectrum ratio, which improves photomorphogenesis and thus the size and quality of the harvest
- Unique design allows flexible luminaire wiring and adjustment
- high quality electronics and state-of-the-art OSRAM chips
- manual and automatic power control in 4 steps from 40 to 100% power
- low profile
- high lifetime > 90000 hours and minimal power drop over time
- suitable for growing herbs, vegetables, microgreens, etc.
- approx. 30 % cheaper (for the same quantity)PPF) than the previous SANlight Q-series
Dimming and light output control
Either with a manual SANlight dimmer (M-Dimmer for EVO included) or with a Bluetooth dimmer and app.
- M-Dimmer EVO magnetic dimmer is suitable for 1 to 10 luminaires
- Bluetooth dimmer with app is suitable for 1 to a whopping 32000 luminaires
Cleaning, maintenance, warranty:
- never use with other brands of accessories
- SANlight EVO LED luminaires are guaranteed for 3 years
- IP65 protection makes it suitable for areas with relative humidity <99% RH
- dust and dirt reduce efficiency
- the surface of the switched off luminaire should be regularly wiped with a soft cloth moistened with distilled water
- the luminaire must be accompanied by a Sanlight cable and an M-Dimmer EVO dimmer, which can be found in the recommended products
- for connecting multiple luminaires you will need a Sanlight coupling
Growing tips with SANlight LED lighting:
- LEDs emit much less heat, which can have a negative effect on transpiration and cause calcium deficiency
- averagePPFDshould match the requirements of the plants
- photosynthesis rate andtranspirationare directly dependent on temperature, humidity and air exchange
- if we want to grow with higher light densities, it is necessary to artificially increase the CO2 level
- you can measure the light intensity byPARmeter Apogee MQ-500
Product includes:
- 2x EVO 3-100 190W
- 1x power cable Y (total length 3,30m, length of plug to hub 1,80m, length of hub to luminaire plug 1,50m)
- 2x SANlight hangers (2 pcs) with 4x 34kg capacity
- 2x SANlight M-Dimmer
Technical specification of 1 luminaire:
- power input: 190W
- photon flux PPF (PAR): 520 µmol/s
- module efficiency: >3 µmol/J
- dimensions: 818x291x116mm
- weight: 4.1 kg
- max RH humidity: 99%
- recommended ambient temperature: 5-35°C (temperature below 50°C is not a problem according to the manufacturer)
- input voltage range: 100-240/277 50/60 Hz
- max input current: 0.9@220Vac
- IP65
- radiation angle: 90-112°
- warranty: 3 years