GSE Light controller 2channel (V1.60) for Lumatek

GSE Light controller 2channel (V1.60)with 2x16 character display covers all basic needs. It has a keypad with 4 buttons, UP, DOWN, ENTER, Save/Escape.

Functions: start/stop by time, power reduction by room temperature, minimum and maximum dimming range, emergency stop on room overheating accompanied by temperature recovery, restart delay for HPS and MH bulbs to prevent them from starting when the bulb overheats.

Sunrise and sunset functions are available. In the sub-settings you can select the LCD backlight behavior, set the current time with 24 h format, set the output signal from 0-10 V or PWM (pulse width modulation), change °C to °F and languages.
The lighting controller has 2 separate channels for 2 separate rooms.

The device comes with a 4m long temperature cable for one channel.
The adapter allows you to split the output signal into several connectors, terminal block, RJ11 (for several brands, more to follow). Screws and dowel for wall mounting.

How many lights can you connect?
Depending on what fixtures you have, we provide a 50 mA output signal per channel, which should allow you to connect at least >50 to an infinite number of fixtures operating with a 0-10 V signal. If the light offers PWM input, cable length and number of lights >1'000

Available:
- Time and date
- Day counter
- Dimming by temperature
- Dimming range setting
- Off by temperature
- Restart delay
- Sunrise
- Sunset
- 0-10V or PWM signal
- Temperature offset (calibration)
- Temperature °C or °F
- Backlight setting
- Language setting: English, Spanish Italian, German and French

Package includes:
- 1x light controller
- 1x temperature sensor
- 1x mounting screws and dowel
- 1x user manual
- 1x power supply (depending on variant)

Is a power supply required?
- If the LED driver/ballast provides a 2-wire signal-GND, then yes.
- If the LED driver/ballast provides a 3-wire signal-GND-VDC >10 V, then no power supply is required.

The included ballast/LED cable is not included and connects via the RJ45 connector on the side of the light driver. It is usually supplied with the luminaire or can be purchased at any electrical or computer store.

Technical data:
- WxHxD = 140x75x35mm
- Weight: 375g
- Power supply 12VDC 100mA
- Digital 5V sensor Measures temperatures from -55°C to +125°C (-67°F to +257°F)
- Accuracy 0.5°C from -10°C to +85°C
- Protection class IP20