GSE Digital Speed Regulator - Temperature, Min. Speed

Gedetailleerde beschrijving van het product

The GSE Digital Speed Regulator controls the speed of the outtake ventilator depending on the temperature in the grow room and the pre-set minimal speed. If the temperature rises above the pre-set value, the regulator increases the speed of the ventilator to compensate for the temperature change. The ventilator returns to the minimum speed when the room is at the ideal temperature.

This speed regulator can control one outtake ventilator.

The GSE regulator and the connected ventilator create a stable climate inside your grow area or any place which requires ventilation (like kitchens, offices and factories). The rotation of the ventilator is adjustable to 20-100%, which allows you to significantly decrease the noise produced by the ventilator. The optimal temperature can be set to 20 - 30 °C. The TRIAC regulator can only control ventilators with an AC engine.

The GSE temperature and min. speed regulator is easy to operate - both values are set using two knobs.

A great advantage is the IP54 rating of the protective cover - the regulator is resistant to dust and splashing water, which is especially practical in the highly humid environment of a grow room. 

The regulator includes a temperature sensor on a 4m long cable.

Product details:

• Regulator size: 130x80x70mm
• Package size: 160x100x90mm
• Designed for: 1A / 200W / TRIAC 1x16A
• Max. consumption of the ventilator: 200W
• Voltage: 230V / 50HZ
• Digital temperature sensor: 5V
  
• Temperature measuring range:  from –55°C to +125°C (–67°F to +257°F)
• Accuracy: 0.5°C(at  –10°C to +85°C)
• Protective cover rating: IP54 (dust protection, resistant to splashing water from all sides)
• Regulation type - TRIAC
• Setting range:
  • Temperature: 20C° to -30C°
  • Minimal speed: Off, when regulation is on: 20-100%
• Power input cable: approx. 1.5 m
• Temperature sensor cable: 4m

If you have any questions, contact us at info@higarden.eu.