MTJ2 - Digital Thermostat (Heating/Cooling)

Code: MTJ2
Free shipping
Brand: Malapa
€254,90 €204,90 €169,34 excl. VAT
In stock within 3 days
Delivery offer

The Malapa MTJ2 is a digital thermostat for switching the connected ventilator according to the room temperature. The device sets the ventilator on the pre-set lowest speed at optimal temperature or lower. When the temperature rises above the ideal temperature, it increases the speed to the pre-set maximum setting.

Detailed information

Product detailed description

The Malapa MTJ2 is a digital thermostat for switching the connected ventilator according to the room temperature. The device sets the ventilator on the pre-set lowest speed at optimal temperature or lower. When the temperature rises above the ideal temperature, it increases the speed to the pre-set maximum setting. Both the speed settings are step-less and range from 0% to 100%. The ideal temperature can be set anywhere between 0° and 80°C. 

By setting the hysteresis, you control when the heating/cooling device turns on/off. For example, if you set the hysteresis to 2°C and the ideal temperature to 20°C, a heater will turn on at 18°C. All settings save automatically. The maximum load of the appliance is up to 900W.

The LCD screen shows the current temperature, optimal temperature and whether the connected appliance is on or off. If there is any fault in the connected device, the thermostat or the sensor, an optical and acoustic alarm turns on. The device is protected by a fuse. The package includes a temperature sensor on a 1,5m cable, a 3m power cable and brackets for attaching the thermostat to a wall. 

Settings:

  • Min. speed: 0-100%
  • Max. speed: 0-100%
  • Temperature: 0°- 80°C 
  • Hysteresis: 1° - 10°C 

MTJ2 Specification:
- max. inductive load: 900W (3,9A)
- power input: 230V AC, 50Hz
- power input cable: 3m
- output: heating, cooling (NO/NC)
- operating temperature: 20 to 70 °C
- operating humidity: 0 - 90% RH
- storing temperature: 0° - 45°C 
- hysteresis settings: 1 - 10 °C
- temperature settings: 0°- 80°C 
- temperature sensor: digital, calibrated (manufacturer: DALLAS)
- temperature sensor cable: 1,5 m
- measurement accuracy: +- 0,25 °C
- sensor size: diameter 10mm, length 60 mm
- built-in fuse
- data storage: 35 years
- ingress protection: IP44 (resistant to splashing water)
- total weight: 1130 g
- size: 170 x 120 x 85 mm
- casing: ABS RoHS

If you have any questions, contact us at info@higarden.eu

Additional parameters

Category: Thermostats
Outlets: 2x
Connection: 1x Socket 230V
Speed control according to: Min. Speed, Temperatures, Maximum speeds
PFHGX: Levné, Nejprodávanější, Doporučené, Kvalitní, Značkové, Základní

Be the first who will post an article to this item!

Only registered users may post articles. Please log in or register.

Do not fill out this field: