HY10 - MINI Electronic Humidistat
Code: 9073Product detailed description
The HY10 electronic humidistat automatically switches on the connected humidifier or dehumidifier to keep the RH in the room constant. The humidity monitor can signal extreme values using a safety device. The ideal humidity can be set ranging from 40% to 90% RH (relative humidity) using the knob on the device.
The device is compact and suitable for limited spaces. It's designed to be installed on a DIN rail or on a flat surface.
Even though it's designed for a dehumidifier or a humidifier, it can control a ventilator, heater, drier and other appliances with a resistive load of up to 1800W (8A).
Features
- No battery needed
- Remembers the settings even after a power outage
- Quick settings
- Stable humidity without fluctuation
- NO and NC contact
- Temperature compensation
- Optical LED signalling
- High switched output - 1800W
- Compact size
- Simple and quick installation (on a surface or DIN rail)
HY10 Specification:
- power input: 230 V AC 50 HZ
- installation: flat surface/ DIN rail (35 mm)
- max. load: resistive 1800 W/ 230 V (8 A/ 230 V)
- max. load: inductive 360 W/ 230 V (1,6 A/ 230 V)
- contact: NC, NO
- humidity regulation: 40%-90% RH (relative humidity)
- operating temperature: 0 to +60 °C
- operating humidity: max. 95% RH (non-condensing)
- hysteresis: 5% RH (+- 3% tolerance)
- sensor: electronic
- response time: about 5 seconds
- signalling: LED light
- conductor diameter: up to 2,5 mm2
- lifespan: > 50 000 cycles
- complies with: EN 55014-1-2, EN 61000-3 2, EN 61000-3-3
- size: 64,5 x 42 x 38 mm
- total weight: 70 g
- ingress protection: IP20
If you have any questions, contact us at info@higarden.eu.
Additional parameters
Category: | Humidistats (Hygrostats) |
---|---|
Connection: | 1x Socket 230V |
Speed control according to: | Humidity |
PFHGX: | Levné, Nejprodávanější, Doporučené, Kvalitní, Značkové, Základní |